PPP Configuration Practice Point to Point Protocol

Lab Diagram

172.16.1.0\30

192.168.1.0\24

192.168.2.0\24

Lab Objectives

  • Cable a network in accordance with the diagram given
  • Configure the hostname and interface IP addresses, or paste the initial configuration onto all devices
  • Configure both dvices to use a non proprietary protocol between each other
  • Configure R1 with a clock rate of 56000
  • Configure both devices to use PAP and CHAP authentication, with CHAP as the primary authentication method (both routers should use the password password4)

Initial Configuration (Already applied to devices in console)

R1
!Configuration generated by CCNAPractice.com 
!
!
hostname R1
!
!
!
!
interface Serial0/0
 ip address 172.16.1.1 255.255.255.252
 no shutdown
!
interface FastEthernet0/0
 ip address 192.168.1.1 255.255.255.0
 no shutdown
!
!
!
!
!
!
line con 0
!
end

!Configuration generated by CCNAPractice.com 
!
!
hostname R2
!
!
!
!
interface Serial0/0
 ip address 172.16.1.2 255.255.255.252
 no shutdown
!
interface FastEthernet0/0
 ip address 192.168.2.1 255.255.255.0
 no shutdown
!
!
!
!
!
!
line con 0
!
end

Final Configuration

R1
!Configuration generated by CCNAPractice.com 
!
!
hostname R1
!
username R2 password password4
!
!
!
interface Serial0/0
 ip address 172.16.1.1 255.255.255.252
 clock rate 56000
 encapsulation ppp
 ppp authentication chap pap
 ppp pap sent-username R1 password password4
 no shutdown
!
interface FastEthernet0/0
 ip address 192.168.1.1 255.255.255.0
 no shutdown
!
!
!
!
!
!
line con 0
!
end

!Configuration generated by CCNAPractice.com 
!
!
hostname R2
!
username R1 password password4
!
!
!
interface Serial0/0
 ip address 172.16.1.2 255.255.255.252
 encapsulation ppp
 ppp authentication chap pap
 ppp pap sent-username R2 password password4
 no shutdown
!
interface FastEthernet0/0
 ip address 192.168.2.1 255.255.255.0
 no shutdown
!
!
!
!
!
!
line con 0
!
end


R1#
R2#

Comments